Edgen Murray has the largest stock of Square and Rectangular
Hollow Section for Offshore Applications anywhere in the world.
PRODUCT
STOCK SIZE RANGE
MATERIAL SPECIFICATION
Rectangular Hollow
50 x 30 x 2.5mm - 5.0mm
EN 10210-1:1994 S355J2H
60 x 40 x 2.5mm - 6.3mm
80 x 40 x 3.0mm - 8.0mm
See also comments under Chemical
90 x 50 x 3.0mm - 8.0mm
and Mechanical Properties
100 x 50 x 3.0mm - 10.0mm
100 x 60 x 3.0mm - 8.0mm
120 x 60 x 3.6mm -8.0mm
120 x 80 x 5.0mm - 10.0mm
150 x 100 x 4.0mm - 12.5mm
160 x 80 x 4.0mm - 12.5mm
200 x 100 x 5.0mm - 16.0mm
200 x 120 x 5.0mm - 16.0mm
200 x 150 x 5.0mm - 16.0mm
250 x 100 x 5.0mm - 16.0mm
250 x 150 x 5.0mm - 16.0mm
260 x 140 x 5.0mm - 16.0mm
300 x 100 x 5.0mm - 16.0mm
300 x 150 x 10.0mm - 12.5mm
300 x 200 x 5.0mm - 16.0mm
300 x 250 x 6.3mm - 16.0mm
350 x 150 x 5.0mm - 16.0mm
350 x 250 x 6.3mm - 16.0mm
400 x 150 x 6.3mm - 16.0mm
400 x 200 x 6.3mm - 16.0mm
400 x 300 x 8.0mm - 16.0mm
450 x 250 x 8.0mm - 16.0mm
500 x 200 x 8.0mm - 16.0mm
500 x 300 x 8.0mm - 20.0mm
All sizes will be supplied as an electric welded product with the exception of the following sizes.
400 x 400 x 20mm and 500 x 300 x 20.0mm shall be supplied as a submerged arc welded product.
150 x 150 x 16mm and 200 x 100 x 16.0mm shall be supplied as a seamless product.
Other sizes and thickness may be available by arrangement.
All materials available with certification to EN 10204:2004 Type 3.2,
All material shall be supplied in the Hot Finished condition with restricted carbon equivalents and guaranteed impact properties at minus 20 degrees centigrade.
A selection of Cold Finished material can also be supplied by arrangement, as can alternative material specifications.
For all of your requirements and further information, please speak with your usual point of contact.
