•    Global Locations

• Abrasive Resistant Pipe
• Carbon Products
• Low & C'sion Resistant Alloy
• Edgen Murray Canada
• Nickel Alloys
• Services
• Structural Hollow Section
• Structural Plate
• Structural Sections
• Structural Seamless Tubulars
• Welded Tubulars

PRODUCT	STOCK SIZE RANGE	MATERIAL SPECIFICATION
Square Hollow	40 x 40 x 2.5mm - 5.0mm	EN 10210-1:1994 S355J2H
	50 x 50 x 2.5mm - 6.3mm
	60 x 60 x 2.5mm - 8.0mm	See also comments under Chemical
	70 x 70 x 3.0mm - 8.0mm	and Mechanical Properties
	80 x 80 x 3.0mm - 8.0mm
	90 x 90 x 3.6mm - 8.0mm
	100 x 100 x 4.0mm - 10.0mm
	120 x 120 x 4.0mm - 12.5mm
	140 x 140 x 5.0mm - 12.5mm
	150 x 150 x 5.0mm - 16.0mm
	160 x 160 x 5.0mm - 16.0mm
	180 x 180 x 5.0mm - 16.0mm
	200 x 200 x 5.0mm - 16.0mm
	250 x 250 x 6.3mm - 16.0mm
	300 x 300 x 6.3mm - 16.0mm
	350 x 350 x 8.0mm - 16.0mm
	400 x 400 x 8.0mm - 20.0mm

Chemical and Mechanical Properties

PRODUCT	VALUES
Carbon maximum	0.22%
Silicon Maximum	0.55%
Phosphorous Maximum	1.60%
Sulphur Maximum	0.035%
Carbon Equivalent Maximum	0.43%
Tensile	490 - 630 n/mm2
Minimum Yield	355 n/mm2
Impacts (minus 20 degrees centigrade)	27 joules minimum average (10 x 10 specimen)

In addition Chrome, Copper, Molybdenum, Nickel, Titanium and Vanadium shall be reported on the test certificate.