•    Global Locations

PRODUCT	STOCK SIZE RANGE	MATERIAL SPECIFICATION
Rectangular Hollow	50 x 30 x 2.5mm - 5.0mm	EN 10210-1:1994 S355J2H
	60 x 40 x 2.5mm - 6.3mm
	80 x 40 x 3.0mm - 8.0mm	See also comments under Chemical
	90 x 50 x 3.0mm - 8.0mm	and Mechanical Properties
	100 x 50 x 3.0mm - 10.0mm
	100 x 60 x 3.0mm - 8.0mm
	120 x 60 x 3.6mm -8.0mm
	120 x 80 x 5.0mm - 10.0mm
	150 x 100 x 4.0mm - 12.5mm
	160 x 80 x 4.0mm - 12.5mm
	200 x 100 x 5.0mm - 16.0mm
	200 x 120 x 5.0mm - 16.0mm
	200 x 150 x 5.0mm - 16.0mm
	250 x 100 x 5.0mm - 16.0mm
	250 x 150 x 5.0mm - 16.0mm
	260 x 140 x 5.0mm - 16.0mm
	300 x 100 x 5.0mm - 16.0mm
	300 x 150 x 10.0mm - 12.5mm
	300 x 200 x 5.0mm - 16.0mm
	300 x 250 x 6.3mm - 16.0mm
	350 x 150 x 5.0mm - 16.0mm
	350 x 250 x 6.3mm - 16.0mm
	400 x 150 x 6.3mm - 16.0mm
	400 x 200 x 6.3mm - 16.0mm
	400 x 300 x 8.0mm - 16.0mm
	450 x 250 x 8.0mm - 16.0mm
	500 x 200 x 8.0mm - 16.0mm
	500 x 300 x 8.0mm - 20.0mm

All sizes will be supplied as an electric welded product with the exception of the following sizes.

400 x 400 x 20mm and 500 x 300 x 20.0mm shall be supplied as a submerged arc welded product.

150 x 150 x 16mm and 200 x 100 x 16.0mm shall be supplied as a seamless product.

Other sizes and thickness may be available by arrangement.

All materials available with certification to EN 10204:2004 Type 3.2,

All material shall be supplied in the Hot Finished condition with restricted carbon equivalents and guaranteed impact properties at minus 20 degrees centigrade.

A selection of Cold Finished material can also be supplied by arrangement, as can alternative material specifications.

For all of your requirements and further information, please speak with your usual point of contact.