| MATERIAL SPECIFICATION |
OUTSIDE DIAMETER |
WALL THICKNESS RANGE (MM) |
| EN 10225:2001 S355G15+N |
60.3 mm |
3.91, 5.50, 7.10, 8.74, 11.10 |
| BS 7191 1989 355EM |
88.9 mm |
5.50, 7.62, 11.13, 15.24 |
| API 5L X52 Modified |
114.3 mm |
6.02, 8.56, 11.10, 13.49, 17.12, |
|
141.3 mm |
6.60, 8.70, 9.52, 12.70, 16.00, 19.05, 24.50 |
|
168.3 mm |
7.11, 9.52, 10.97, 12.70, 14.30, 16.00, 17.50, 18.30, 21.95, 25.40 |
| All manufactured to |
193.7 mm |
8.00, 10.00, 12.70, 16.00, |
| restricted chemistry and |
219.1 mm |
8.18, 9.52, 10.31, 12.70, 15.90, 19.05, 23.01, 25.40, 31.75 |
| enhanced mechanical properties. |
244.5 mm |
8.00, 10.00, 12.70, 16.00, 19.05 |
|
273.0 mm |
9.27, 12.70, 15.90, 19.05, 25.40, 31.75, |
|
323.8 mm |
9.52, 10.31, 12.70, 14.30, 16.00, 19.05, 25.40, 31.75, 38.10 |
| Fully certified to |
355.6 mm |
9.52, 10.31, 12.70, 15.90, 19.05, 25.40, 31.75, 38.10, 50.80 |
| EN 10204:2004 Type 3.2 |
406.4 mm |
9.52, 12.70, 15.90, 19.05, 20.60, 25.40, 31.75, 38.10, 50.80 |
|
457.2 mm |
12.70, 16.00, 19.05, 25.40, 31.75, 38.10, 50.80 |
| Compliance to NACE MR-01-75 |
508.0 mm |
12.70, 15.90, 19.05, 20.60, 25.40, 31.80, 38.10, 50.80 |
|
559.0 mm |
12.70, 15.90, 19.05, 25.40, 31.75, 38.10, 50.80 |
|
610.0 mm |
12.70, 15.90, 19.05, 20.60, 25.40, 31.75, 38.10, 50.8 |
|
| The material specifications as detailed above cover the entire list of specified sizes. |
| Other material specifications, diameter and wall thickness are available by arrangement. |
| In particular a large range of carbon specifications are available in OD range, 3.175mm - 660.4mm from our US Stocks. |
| Pipe lengths are generally double randoms. |
| To determine the weight of a seamless tubular, please use the following formula. |
| (OD-WT) x WT x 0.0246615 = kg per metre. |
| Outside diameter = OD. Wall Thickness = WT. Both to be applied as mm. |
| As an example, a tubular with a 219.1 mm outside diameter and 12.70 mm wall thickness can be calculated as: |
| (219.1-12.70) x 12.70) x 0.0246615 = 64.645 kg per metre |
|
